¿ªÔÆÌåÓý

  1. 7x12MiniLathe
  2. Topics

Headstock taper

 

I have a Homier Speedway 7x10 mini lathe and would like to know what Morse taper the headstock has.?

Tom
 

They're all #3 in the headstock and #2 in the tailstock. That's one of the nice things about the mini-lathes. The headstock taper is much bigger than you'd expect in a lathe of this size.

Mike Taglieri?


On Tue, Jan 16, 2024, 3:42 PM Thomas Key <takey89@...> wrote:
I have a Homier Speedway 7x10 mini lathe and would like to know what Morse taper the headstock has.?

Tom
 

That'd be a #3 Morse Taper.


On Tue, Jan 16, 2024 at 3:42 PM, Thomas Key
<takey89@...> wrote:
I have a Homier Speedway 7x10 mini lathe and would like to know what Morse taper the headstock has.?

Tom
 

Doug Pfaff
3:47pm? ?
That'd be a #3 Morse Taper

Have any relatives living in Fresno or Clovis California?

Dave?
 

Dave,

Not that I'm aware of. Ours isn't a very common name as German surnames go, but it could be possible.

Doug


On Tue, Jan 16, 2024 at 8:01 PM, davesmith1800
<davesmith1@...> wrote:
Doug Pfaff
3:47pm? ?
That'd be a #3 Morse Taper

Have any relatives living in Fresno or Clovis California?

Dave?

 

Doug Pfaff
6:52pm? ?
Dave,
Not that I'm aware of. Ours isn't a very common name as German surnames go, but it could be possible.
Doug

I very really see that last name and I when to school with 2 Pfaff.?

With my name it is everywhere.?
My mother is also a German name Willz it was changed in WW one to Wills.?

Dave?

1 - 6 of 6