??? here's a tube on the Craftsman I mentioned
theres several tubes with other folks ideas
animal
On 1/29/25 10:13 PM, mike allen wrote:
toggle quoted message
Show quoted text
Craftsman used to sell a bench that held 3 separate bench top
power tools? with one always on the bench top . maybe finding
that could give ya ideas what/whatnot to do . I think the height
of the mill is gonna be the issue .
good luck , keep us posted
animal
On 1/29/25 8:48 PM, Tony Smith via
groups.io wrote:
Dave¡¯s
real hobby is beating dead horses.?
?
Glad
to see you added ¡°OT¡±, I guess Dave couldn¡¯t figure out
how to do that (despite telling us how).? Lol.
?
I¡¯m
pondering making a flip-top bench with my 7x12 on one side
and the mini-mill on the other.? Wish me luck, I think I
might need it.? (Probably should measure the mini-mill
before going too far.)
?
Tony
?
?
?
Hi
guys. Sorry to come to this a bit late, I have 2 points
though.
?
* I¡¯m
not sure what the problem is, as anyone can add OT to the
title, as I have done. So why the continuing debate ???
?
* I am
amazed at some of the replies, not only to this but others
as well. Where part of the reply is in understandable
English and the rest is gobbledygook !!!? I can understand
and forgive ?differences where clearly English is a second
or third language. But where part of the message shows the
writer understands English, I despair. Doesn¡¯t anyone read
through and correct any more ?
?
???????????????
Ellis
?
?
If rotary table goes
a mill it is OT.
But if goes Mini
lathe it is $&#^$
I guess it depends
on if you interested read a about putting on a mini
lathe if on topic or off.
If do not like what
they wrote then? write moderators and say OFF TOPIC
and ask to have it delete post so no has anything thing
to read.??
The bottom for group
to be interesting is have something to read about and
better to comment on too.
In November of 2023
I finally purchased a mini after reading about mini
lathes since 2005.
The resoan thinking
a mini lathe in 2005 changed by time purchased.? I chose
to write about here and gave everyone here some read and
write about.?
No one goes out buys
a lathe every month. My first was a garulatoin present
it only down payment on a $10,000 today same lathe cost
$80,000 had for over 30 years. My next had for 20 years.
The point is most do not go out and buy new lathe very
often. So hard for very here to say a lot? .?
So we all
here need more than jest the mini lathes to talk
about or this would a very slow group
On Fri, Jan 24, 2025
at 01:10 AM, Tony Smith wrote:
Rotary
table is fine.? Way better than whatever this (or
your lack of understanding of how motor temperature
ratings work).
?
Tony
?
?
?
What is next thd chuck on the mini
lathe is ot
On Thu, Jan 23, 2025 at 03:22 PM,
Tony Smith wrote:
All that
blah blah blah, and you still didn¡¯t flag
this thread as being off topic.
?
Two
keystrokes is still two too many for you, I
guess.
?
Tony
?
(Seriously,
no-one cares, not even you.)
?
?
The
first that only want to see mini lathes
only. I seen on some? groups it has to
what title is only.
Second
group?arsed or not wanting to make the
effort
to
add OT to help the first group.?
Now
the owner and moderators are trying to
keep group fun and interesting for all.
Then
dealing with the first group and second
group not helping.?
A owner and
moderators have hard job at times. How
mush? can you talk the subject.
Some think you only
talk about a mini lathes and the drill
chuck is off subject.??
So
soon or later you will have to go little
or more off for slow times?
Last
year this had a long topic on bikes. It
was a interesting topic to read I had
nothing to say. The important part it
made group interesting for slow time.
If
look at a few OFF topic I have post here
in Tilte I put OFF SUBJECT .?
I
Like OT Simple hit two keys at
beginning?
On
Wed, Jan 22, 2025 at 04:55 PM, Tony
Smith wrote:
Nobody
cares so long as it¡¯s not too
stupid. ?The moderators will be
tired of seeing this stupid crap
shortly and tell us to knock it off.
?
Lists
die because of no traffic or too
much stupid crap.? And this thread
has definitely hit the latter.
?
And
you still can¡¯t be arsed to add OT
to the subject.
?
Tony
?
?
?
[Edited Message
Follows]
[Reason: Sorry used html code and
change ]
I this some type
limit off topic it best for and
some one complain and others
will anything under sun.?
I am on some sites
that OT is ok and no one goes
overboard. They respect the few
little rules.?
- ?No
political?
- No ads
- ?It ok
with Any one's Wife / Girl?
- It is
ok for any one's
grandchildren see it too.?
Sorry forgot No
html codes
On Wed, Jan 22,
2025 at 02:47 AM, Tony Smith
wrote:
When people
can¡¯t be arsed to even use
OT, they sure ain¡¯t gunna
use those either.
?
This thread is
off topic, look at all the
people who could be bothered
to mark it OT.
?
Tony
?
?
?
?
May have
few for one for not like
OFF TOPIC.?
AH? ?for
AROUND THE HOME?
For I am OK
with or without tags. I
enjoy read like good old
fashione Magazines?
