开云体育

On 16 Dec 2024, at 07:30, Miket_NYC via groups.io <mctaglieri@...> wrote:

?

"For ME, I would absolutely go with the longer bed.? That distance can gets used up pretty fast with a chuck in the headstock, work piece, drill, and Jacobs chuck in the tail stock.? I also like a longer bed so I can move the tailstock further out of my way when not using it."

I agree completely, but I worked for years (and made several large projects), with a Harbor Freight 7x10, and there are ways to get around bed-length problems. (And these ways are worth knowing about no matter how big your lathe is). A drill in the tailstock doesn't HAVE to be in a chuck. You can drill a pilot hole with a small drill in the chuck, then hold your big drill on the tailstock center with a lathe dog on the drill shaft to keep it from turning. (And that center can be a homemade short one that hardly sticks out, not the giant centers you buy). When drilling from the tail stock, you can also shorten drills by simply sawing off the shaft -- they aren't hardened.

Also, many things held in a chuck can instead be held on the faceplate. Most people used the faceplate for holding odd-shaped things that won't fit in the chuck, but if you're bed-challenged, you can also use it to save the ~2" of bed length that a chuck uses up.

Eventually I bought a longer bed for my 7x10 from little machine shop, but I don't regret my original purchase of the short bed. It helped develop my ingenuity.

Mike Taglieri

---------- Forwarded message ---------
From: Charles Kinzer via <ckinzer=[email protected]>
Date: Sun, Dec 15, 2024, 6:45?PM
Subject: Re: [7x12MiniLathe] Sieg C3 vs SC3
To: [email protected] <[email protected]>

I'm not completely expert in the differences and just rambling from memory.

But first, I don't think anybody can say if lathe X is better than lathe Y - for YOU.

It is my understanding that the SC3 has a better motor arrangement and also a longer bed (7x16 instead of 7x14).

For ME, I would absolutely go with the longer bed.? That distance can gets used up pretty fast with a chuck in the headstock, work piece, drill, and Jacobs chuck in the tail stock.? I also like a longer bed so I can move the tailstock further out of my way when not using it.

But plenty are fine with the various shorter bed models.

Another thing I think about is the cost of the tooling.? And how I would feel paying the same money for tooling (chucks, better tool post, and on and on) for the lathe I didn't really want versus the lathe I really did want.? So, I suggest it is often best to go for the most machine you reasonably can unless cost is absolutely a major factor.

That would also mean looking at options other than C3 versus SC3 and perhaps other lathes.

Charles E. "Chuck" Kinzer

On Sunday, December 15, 2024 at 02:40:45 PM PST, Old Boilermaker via <alned03=[email protected]> wrote:

Contemplating buying a mini lathe for home use. Is it worth spending the extra money to buy a SC3 as opposed to a C3 ?.