¿ªÔÆÌåÓý

Re: Mounting PVC Fitting for Boring


 

I made the bore with a slight (about 1/2 degree) taper which gave a nice press-on fit for both the vacuum fitting and the saw fitting.? Couldn't do that on drill press or with hole saw (I don't think).

On Thursday, October 24, 2024 at 05:09:48 PM PDT, Roy via groups.io <roylowenthal@...> wrote:


If you have room? for it, a sweep elbow would be a better choice than a standard elbow.
?
?< >
?
I'd probably do it on the drill press, but to keep it a lathe project, you could mount the elbow on the carriage & use a boring head or suitable hole saw chucked in the spindle.
?
Roy

Join [email protected] to automatically receive all group messages.