Re: Mounting PVC Fitting for Boring
|
Hi Mike. Personally I would take the easy route and use short pieces of plastic pipe bored etc to suit and connect all together. One piece to fit dust collection port, other end to fit 90deg fitting, then the next piece from the fitting, other end to suit the vacuum hose. As short as possible, shouldn’t take up too much extra room. ????????? Ellis ? ?
toggle quoted message
Show quoted text
I've got a 70's era radial arm saw with a dust collection port that doesn't match current vacuum fittings.? I bored one end of a 1 1/4" PVC coupling to fit the saw outlet and the other end to fit the vacuum hose.? It works, but for long term a 90-degree fitting would be much better. I have a 1 1/4" PVC 90 that I would like to bore out to do the job.? However, having trouble figuring out how to mount on my 3" 4-jaw chuck (see photo).? I need to mount so the opening(s) is centered on the spindle so the 4-jaw adjustment capability would be great if I could get it mounted. Any ideas on how to mount? Attachments: ·?????? ell mount.JPG
|
