bimba m 125

2020-02-23T19:26:12-08:00

I have a bimba m 125 air cylinder. Can I convert it to fluid to use as a down feed for my 4x6 bandsaw

[email protected] All Messages By This Member #14986 I have a?bimba m 125 air cylinder.? Can I convert it to? fluid to use as a down feed for my 4x6 bandsaw?
Bill Armstrong All Messages By This Member #14987 开云体育 Without going out and dragging out a Bimba book in my library.....here’s what I can tell ya..... As long as it’s a double acting, and has sufficient stroke, it should work. ‘Original line’ (I’m guessing that’s what it is) Bimba pneumatic cylinders have buna-n (Nitrile) seals, so are compatible with any mineral oil. DO NOT use brake fluid.? If memory serves, they are rated at 250 psi, so don’t exceed that pressure, although, we ran many at 280-300 PSI oil pressure.? Nothing to convert. If it is an original line, they are non-repairable/rebuildable.? They are good cylinders. We used many of them for controls on mining equipment. On a band saw, one should last longer than the saw.? ;) Bill toggle quoted message Show quoted text On Feb 23, 2020, at 7:04 PM, "saunderswashed3981@..." <saunderswashed3981@...> wrote: ? I have a?bimba m 125 air cylinder.? Can I convert it to? fluid to use as a down feed for my 4x6 bandsaw?

开云体育