开云体育

ctrl + shift + ? for shortcuts
© 2025 Groups.io
  1. 4x6bandsaw
  2. Topics

Bandsaw vertical table template?

 

Members,

My bandsaw did not come with a table, so, I would like make one. Anyone have a template to share. I just want to get the mounting hole pattern and blade slot correct without wasting material should I screw up.

Thanks.......Lee
 

开云体育

Lee,

Does this help:



Rick

On Oct 5, 2019, at 7:17 PM, Lee Rice ricelee@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?Members,

My bandsaw did not come with a table, so, I would like make one. Anyone have a template to share. I just want to get the mounting hole pattern and blade slot correct without wasting material should I screw up.

Thanks.......Lee




------------------------------------
Posted by: Lee Rice
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
???http://groups.yahoo.com/group/4x6bandsaw/

<*> Your email settings:
???Individual Email | Traditional

<*> To change settings online go to:
???http://groups.yahoo.com/group/4x6bandsaw/join
???(Yahoo! ID required)

<*> To change settings via email:
???4x6bandsaw-digest@...
???4x6bandsaw-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
???4x6bandsaw-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
???https://info.yahoo.com/legal/us/yahoo/utos/terms/
 

开云体育

Hi Rick,

This is definitely an option. Thanks. Still would like to find the original pattern if possible.

Lee


On Oct 5, 2019, at 7:24 PM, Rick Sparber rgsparber.ya@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?

Lee,


Does this help:



Rick

On Oct 5, 2019, at 7:17 PM, Lee Rice ricelee@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?Members,

My bandsaw did not come with a table, so, I would like make one. Anyone have a template to share. I just want to get the mounting hole pattern and blade slot correct without wasting material should I screw up.

Thanks.......Lee




------------------------------------
Posted by: Lee Rice <ricelee@...>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
???

<*> Your email settings:
???Individual Email | Traditional

<*> To change settings online go to:
???
???(Yahoo! ID required)

<*> To change settings via email:
???4x6bandsaw-digest@...
???4x6bandsaw-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
???4x6bandsaw-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
???
 

开云体育

That guide plate as you call it, or, bearing guard, is another thing my saw is missing. Could use the pattern for that as well.


On Oct 5, 2019, at 7:35 PM, Lee Rice ricelee@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?

Hi Rick,


This is definitely an option. Thanks. Still would like to find the original pattern if possible.

Lee


On Oct 5, 2019, at 7:24 PM, Rick Sparber rgsparber.ya@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?

Lee,


Does this help:



Rick

On Oct 5, 2019, at 7:17 PM, Lee Rice ricelee@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?Members,

My bandsaw did not come with a table, so, I would like make one. Anyone have a template to share.. I just want to get the mounting hole pattern and blade slot correct without wasting material should I screw up.

Thanks.......Lee




------------------------------------
Posted by: Lee Rice <ricelee@...>
------------------------------------


------------------------------------

Yahoo Groups Links

<*> To visit your group on the web, go to:
???

<*> Your email settings:
???Individual Email | Traditional

<*> To change settings online go to:
???
???(Yahoo! ID required)

<*> To change settings via email:
???4x6bandsaw-digest@...
???4x6bandsaw-fullfeatured@...

<*> To unsubscribe from this group, send an email to:
???4x6bandsaw-unsubscribe@...

<*> Your use of Yahoo Groups is subject to:
???
 

Hi Lee,
If you check out my photo album see what I did. I have drawings if you are interested. Sorry quick reply I’m off to work!

Cheers Kerrin
 

I made one out of 3/4 plywood that I have used hundreds of times. It has a hinge that lets it fold flat for storage. It slides into position and is held in place by the saw vice. It also has a seat so you can straddle the saw and sit as you work. I will post a photo and dimensions later today.

Dallas
 

Hey Kerrin,

Ive been trying to access your photos with limited success. 2 computers and my iPad and i only see a few of the photos in the group.
 

Hi Lee,
Just checked, & there seems to be an issue with photos! Like you i only see occasional photos too! I cant even see any of mine!

Can somebody else please check if they can see any photos please & let us know?

Lee, i can send you copies if you would like?

Cheers Kerrin
 

开云体育

Kerrin,

That would be appreciated! Thank you!


On Oct 6, 2019, at 9:07 AM, kerrin.galvin@... [4x6bandsaw] <4x6bandsaw@...> wrote:

?

Hi Lee,
Just checked, & there seems to be an issue with photos! Like you i only see occasional photos too! I cant even see any of mine!

Can somebody else please check if they can see any photos please & let us know?

Lee, i can send you copies if you would like?

Cheers Kerrin

 

开云体育

??? ??? it's just how YAHELL works these day's , there one minute , gone the next & then back again whenever . no adjustment of your set needed

??? ??? animal

On 10/6/2019 9:07 AM, kerrin.galvin@... [4x6bandsaw] wrote:

?

Hi Lee,
Just checked, & there seems to be an issue with photos! Like you i only see occasional photos too! I cant even see any of mine!

Can somebody else please check if they can see any photos please & let us know?

Lee, i can send you copies if you would like?

Cheers Kerrin

 

开云体育

See attached.

?

I downloaded this several years ago…..not sure from where.

I remember checking the dim’s, and it matched up with my Grizzly saw.

May be some help for you.

Bill

?

From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Saturday, October 05, 2019 7:17 PM
To: 4x6bandsaw@...
Subject: [4x6bandsaw] Bandsaw vertical table template?

?

?

Members,

My bandsaw did not come with a table, so, I would like make one. Anyone have a template to share. I just want to get the mounting hole pattern and blade slot correct without wasting material should I screw up.

Thanks.......Lee
[email protected]
 

My efforts pale in contrast with those shown already.
My only contribution is around some details
1. I think the most important aspect of any vertical table is absolute minimum clearance in front of the blade and along both sides of it.? Small bits jam in any gap wider than the blade and can take your fingers with them.
2. The attached photo shows how far out of square the top of my guide roller bracket is with the blade. Make yours square from the side and front of the blade with an angle grinder or file (I'll get around to doing mine one of these days...)
3. Use a slippery surface for the table.? Aluminium is too soft and sticky.? Hard steel is like Hardox or Bizalloy is good and most lasercutters stock it in thicknesses 1/8" to 1/4".? Mine is melamine surfaced MDF but that breaks out too quickly near the edge of the blade. Formica bench top is very durable and slippery and you can get a big enough bit free from a joinery place where they cut out to put a sink in a benchtop.? Its easier to work with handtools than Hardox.
4. If you can include some quick detach method so much the better.? It only takes ~90sec or so to put on my table but I still resent that every time I have to change, since invariably you want to go back to cutting in the vice immediately after. Maybe a QD table that dovetails on to one of those small permanent tables for the best of both worlds??
5.? Think about how you'll change blades.? Tables that slot on from front of the blade have the all important 'no slot' but stop you changing the blade unless its truly QD or you fill in the slot like Kerrins (I like his design a lot).
Rgds - jv?

1 - 12 of 12