Keyboard Shortcuts
Likes
Search
Ultimate Vice? [1 Attachment]
¿ªÔÆÌåÓýNice John! ? I built some levers for some machines to operate the TPS in the same way. First one I did, I used a slitting saw in the mill to cut the slot. That was slow¡..and that degree of precision is not really necessary. ? So I made a set up like yours. When I made a few more, I tac-welded the spacers onto one of the pieces of flat-bar. ? ? Sorry¡.I can¡¯t seem to find any pics¡..it was a while ago. ? Yes¡..I agree¡there is no one ultimate vise. There are several, that must be made to suit the task! ? Bill ? From: 4x6bandsaw@... [mailto:4x6bandsaw@...]
Sent: Sunday, January 14, 2018 12:45 AM To: 4x6bandsaw@... Subject: RE: [4x6bandsaw] Ultimate Vice? [1 Attachment] ? ? [Attachment(s) from vreededesign@... [4x6bandsaw] included below] Oops the pics didn't come through with the message on the 4x6 Yahoo site?(though it was there in the email notification). Don't understand it but I'll repeat and see if it comes through this time.? Sorry - jv?
|