Keyboard Shortcuts
ctrl + shift + ? :
Show all keyboard shortcuts
ctrl + g :
Navigate to a group
ctrl + shift + f :
Find
ctrl + / :
Quick actions
esc to dismiss
Likes
Search
Downfeed control
开云体育Ken
?
I made part 1 out of solid stainless stock but the
same desired effect could be achieved with some pipe the is the size of the
hydraulic unit body.?1/4" steel strap rolled to fit then dremmel the slots
into it if you don't have access to a mill.
?
Rod
|
|
Alan Rothenbush
After seeing Rod's wonderful workmanship, it occurs to me that I must
be doing something wrong. You see, I have no need to slow things down, on the way down. In fact, I've removed that useless spring and its flesh-eating handle. In fact, I routinely ADD weight to cuts; Al, mild steel and even tool steel ... Alan -- Alan Rothenbush | Before me things create were none, save things Academic Computing Services | Eternal, and eternal I endure. Simon Fraser University | All hope abandon ye who enter here. Burnaby, B.C., Canada | |
开云体育Alan
?
Well I guess I am just spoiled that way: )?I
like having the control on the saw head not just going down but holding the head
in place while moving the stock instead of lifting the head all the way up. Now
I also can?ADD weight on the saw head & not have to?figure out
how?much weight I have on it I'll just adjust it with the hydraulics.
Thanks for the comment on my workmanship.
?
Rod
|
开云体育Ken
?
Just make sure you make the fit as close as
possible, the tighter the fit the better the bracket will work.
?
Rod
|
|
Alan Rothenbush
On Sat, Jan 24, 2004 at 09:30:32AM -0800, rangerod wrote:
AlanI must admit that in the EXTREMELY cramped confines of my TINY shop, not having to lift the head all the way, all the time, would be a welcome addition ... Now I also can ADD weight on the saw head & not have to figure out how much weight I have on it I'll just adjust it with the hydraulics.Hmmm, good point .. very good point. Add the max required weight all at once, then adjust hydraulically based upon stock. That still leaves my original query .. why do I require additional weight whereas everyone else with seemingly identical machines do not ? ... Oh well, I'm about to make another stand for mine, which will require a complete disassembly. I'll stare at things then and maybe find a source of friction currently unknown. Alan -- Alan Rothenbush | Before me things create were none, save things Academic Computing Services | Eternal, and eternal I endure. Simon Fraser University | All hope abandon ye who enter here. Burnaby, B.C., Canada | |
开云体育Alan
?
What pitch blade are you using at this time?
Another feature of the hydraulics is you should be able to use a coarser blade
& control the downfeed so it does not strip the teeth off. Maybe your saw
head is binding on the shaft it swivels on? Good luck with your trouble
shooting.
?
Rod
|
|
Alan Rothenbush
On Sat, Jan 24, 2004 at 06:20:13PM -0600, dswr@... wrote:
These saws should cut ok without additional weight added. Is your bladeNo, the teeth aren't dull and certainly aren't installed backwards. And it's not that it won't cut without added weight, but cuts WAY faster with it. I would guess that my current blade has 100 hours on it, more or less, and even abusing it this way, shows no sign of needing replacement. Alan -- Alan Rothenbush | Before me things create were none, save things Academic Computing Services | Eternal, and eternal I endure. Simon Fraser University | All hope abandon ye who enter here. Burnaby, B.C., Canada | |
|
I thought my suggestions were a wee bit too obvious. 8-)
I think any of these saws will cut faster with added pressure on the blade. The limiting factors are power available and temperature elevation of the blade. As long as the blade does not stall and the temper is not drawn from the blade, everything should be ok. (wear of the moving parts may be greater) The above is my opinion and may be worth the proverbial two cents! 8-) Leo (pearland, tx) |
|
Alan Rothenbush
On Sat, Jan 24, 2004 at 08:17:18PM -0600, dswr@... wrote:
I thought my suggestions were a wee bit too obvious. 8-)I'll forgive you .. one day. <G> I think any of these saws will cut faster with added pressure on theI keep a close eye on the motor temperature, but while it does warm up after 5 minutes or so of cutting, it never gets really hot, even after an hour or better of continuous operation. I'm currently using an 18 TPI blade. I bought it to cut a bunch of square tubing, then was too lazy to change it before cutting some solid stock. The solid stock cut just fine, great in fact, better than the 10-14 I had been using. So on it stays. Aluminum is a different matter, though. The coarser blade jams much less frequently (if at all) than the finer on Al. But an aquarium pump and coolant is in my immediate future; we'll see if that helps the jamming problem. Thanks for all the thoughts, gang ! Alan -- Alan Rothenbush | Before me things create were none, save things Academic Computing Services | Eternal, and eternal I endure. Simon Fraser University | All hope abandon ye who enter here. Burnaby, B.C., Canada | |
|
Richard Albers
--- In 4x6bandsaw@..., Alan Rothenbush <alan@s...> wrote:
<Snip> That still leaves my original query .. why do I require additionalHave you perhaps replaced the original motor? With a heavier one? That's one possibility. RA |
to navigate to use esc to dismiss