开云体育

Would anybody like to share their source for lennox diemaster II
blades I keep hearing about? Either phone/internet order or San
Diego or LA would be helpful.

Thanks,
Vay

--- In 4x6bandsaw@..., "vaysam" <vaysam@y...> wrote:

Would anybody like to share their source for lennox diemaster II
blades I keep hearing about? Either phone/internet order or San
Diego or LA would be helpful.

Thanks,
Vay

Here is a partial list of what J&L Industrial has available. You can
find them at www.jlindustrial.com. The rule for blades is a minimum
of 3 teeth in the part, so an 18 tooth will handle down to about 1/8"
a 10/14 variable will handle up to about 3/8". I like the 6/10
variable for heavier stock, especially aluminum to get the chips out.
Even at these prices these blades are a bargain because of theit
longevity
Ralph Meiser

XFR-80157-L
(99 %)

5' 4 X 1/2 X .0250 X 10/14T
DIEMASTER BANDSAW BLADE
MANUFACTURER: LENOX
Price: $21.35/EA

XFR-80159-C
(99 %)

5' 4 X 1/2 X .0250 X 18T
LENOX DIEMASTER BANDSAW BLADE
MANUFACTURER: LENOX
Price: $21.35/EA

XFR-80366-J
(99 %)

5' 4 X 1/2 X .0350 X 10T
LENOX DIEMASTER BANDSAW BLADE
MANUFACTURER: LENOX
Price: $21.35/EA

XFR-81448-C
(99 %)

5' 4 X 1/2 X .0250 X 6/10T
DIEMASTER BANDSAW BLADE
MANUFACTURER: LENOX
Price: $21.35/EA

Would anybody like to share their source for lennox diemaster II
blades I keep hearing about?? Either phone/internet order or San
Diego or LA would be helpful.

Thanks,
Vay



To unsubscribe from this group, send an email to:
4x6bandsaw-unsubscribe@...



Your use of Yahoo! Groups is subject to the .

WARNING: This electronic mail (E-mail) document may contain privileged information?intended for?the named recipient(s) only. If you have received this communication in error, please notify the sender immediately and subsequently destroy the document/file. Unlawful copying and/or dissemination of the information/data contained herein may be treated as copyright infringement and prosecuted as such.

---

Do you Yahoo!?
- Faster. Easier. Bingo.