开云体育

On Thu, 22 May 2003, howie_meier wrote:

i am just bevore to by a 4x6bandsaw. I cut some steel and sometimes
hardwood (oak, bankirai, teak). Is such a saq also good for cutting
wood. I know that the m/min for the blade at a desired woodsaw is
10 times faster than the one for metall.

I've cut wood with my 4x6 and it works fine. It cuts slower because the
blade is too fine, but that's ok because I can set it up to cut and it
turns itself off automatically. It's not very stable as a vertical saw so
I don't use it that way. If you need a vertical bandsaw it would be best
to get one made only for that.

C|